Wireless Mouse Not Working? 17 Things to Check

Every single thing we could think of

Is your wireless mouse failing to connect to your Windows 10 computer? Does it disconnect after some time? Or is the cursor behaving weirdly? Hardware-related issues, incorrectly configured settings, and corrupt drivers are just a few of the many reasons that can prevent your wireless mouse from working correctly.

If you want to fix your wireless mouse, then the list of troubleshooting tips that follow should help you out.

If you have a wireless mouse that’s not working and refuses to connect, we recommend using a wired mouse or trackpad to navigate your computer while working through some of the fixes below. If that’s not possible, the following keys should help you instead:

1. Replace/Recharge Battery

A depleted battery can not only prevent your wireless mouse from connecting to your computer, but it can also cause sluggish or erratic cursor behavior. Try swapping it out with a new battery. If your mouse uses a rechargeable battery, hook it up to a power source for some time.

2. Turn On Power Switch

Almost all wireless mice come with a power switch. Usually, you can find it located at the bottom of the device. If your wireless mouse is not working, make sure that it’s set toON.

3. Be Within Range

Most wireless mice only work within a short range of the USB receiver. Hence, make sure that you’re close to your computer. If you’re using a very old wireless mouse, it’s also a good idea to remove any objects that obstruct it from the receiver.

4. Remove and Plug Again

Sometimes, disconnecting and reconnecting the wireless receiver can help fix temporary glitches that prevent your wireless mouse from working correctly. Give it a go.

5. Change USB Ports

Remove and reconnect the USB receiver to a different port on your computer. Ideally, you should avoid connecting it to any externals USB hubs; insert it into a port directly on the computer instead.

If that doesn’t help and your wireless mouse is still not working, you may want totroubleshoot the USB ports on your PC.

6. Restart Computer

Have you tried restarting your computer yet? Usually, that alone resolves most issues. Open theStartmenu (press theWindowskey if the mouse appears frozen), selectPower, and chooseRestartto perform a reboot.

7. Remove Other USB Peripherals

In some cases, computer peripherals such as flash drives, scanners, and printers connected via USB can prevent your wireless mouse from working properly. Try removing them.

If that helped, reconnect the USB peripherals one-by-one to isolate the device causing the problems.

8. Control Cursor Speed

If your wireless mouse acts too slow or too fast, check that the speed settings are up to scratch. PressWindows+S, typemouse settings,and selectOpen. Then, use the slider underCursor speedtoincrease or decrease the cursor speed.

9. Increase Cursor Precision

If you have a tough time pointing at things with your wireless mouse, try increasing the cursor precision.

  1. PressWindows+S, typemouse settings, and selectOpen.

  2. SelectAdditional Mouse Optionsfrom the right of theSettingspane.

  3. Switch to thePointer Optionstab.

  4. Check the box next toEnhance pointer precision.

  5. SelectApplyandOKto save your changes.

10. Clean Optical Lens

If you still have issues with the cursor on your wireless mouse, try cleaning the optical lens on the underside of the device. You can use compressed air or a damp cotton swab dipped in isopropyl alcohol to eliminate dust or grime.

11. Increase Double-click Speed

Do you have trouble double-clicking items with your mouse? Increase the Double Click Speed setting on your computer and see if that helps.

  1. PressWindows+S, typemouse settings, and selectOpen.

  2. SelectAdditional Mouse Options.

  3. Switch to theButtonstab, and use the slider underDouble Click Speedto adjust the double-click speed.

12. Reinstall Mouse Driver

If you continue to have connectivity-related issues or other problems with your wireless mouse, try reinstalling its drivers.

  1. PressWindows+Xand selectDevice Manager.

  2. ExpandMice and other pointing devices.

  3. Right-clickHID-compliant mouse(or the applicable driver for your mouse) and chooseUninstall Device.

  4. Restart your computer. Windows 10 should automatically reinstall the driver during startup.

13. Update Driver/Install Support Software

By default, Windows 10 applies a generic driver to get your wireless mouse to work on your computer. In almost all cases, that is more than enough.

If you continue to have issues with your mouse, however, it’s worth searching the manufacturer’s website for any dedicated drivers or support software. Install them and see if that helps.

14. Disable Fast Startup

Windows 10 comes with a feature calledFast Startupthat allows the operating system tolaunch faster from a cold boot. However, it can also cause issues with wireless mice. Disable it and see if that helps.

  1. PressWindows+Xand selectPower Options.

  2. SelectAdditional Power Settings.

  3. SelectChoose what the power buttons do.

  4. SelectChange settings that are currently unavailable.

  5. Uncheck the box next toTurn on fast startup (recommended).

  6. Restart your computer.

15. Update Windows 10

The latest Windows 10 updates contain bug fixes that can resolve various issues with your computer. It can also help when your wireless mouse is not working. If you haven’t updated your computer in a while, then do it now.

PressWindows+S, typewindows updates, and selectOpen. Then, select theCheck for Updatesbutton and install any pending updates.

Additionally, selectOptional Updates(if the option’s visible) and install any listed hardware driver updates.

16. Uninstall Updates

In rare cases, Windows 10 updates can do just the opposite and break things down. If your wireless mouse started to malfunction after installing an update, try uninstalling it.

  1. PressWindows+S, typewindows updates, and selectOpen.

  2. SelectView Update History.

  3. SelectUninstall Updates.

  4. Right-click the most recent update and selectUninstall.

Did that fix the issue? If so, you shoulddefer Windows updatesuntil the next incremental or feature update hits the shelves.

17. Restore to an Earlier State

If none of the fixes above worked, you could restore Windows 10 to an earlier state where your wireless mouse worked without issues. Provided that your computer has the System Protection functionality enabled, you can use System Restore to do that.

  1. PressWindows+S, typesystem protection, and selectCreate a restore point.

  2. Switch to theSystem Protectiontab and selectSystem Restore.

  3. Work your way through the System Restore wizard and restore your computer using an available system restore point.

Stay Wireless

Did the fixes above help you fix the issue. Hopefully, they did. If not, you’re likely dealing with a defective wireless mouse. If it’s still within the warranty period, consider sending it back for a replacement.

Dilum Senevirathne is a freelance tech writer and blogger with three years of experience writing for online technology publications. He specializes in topics related to iOS, iPadOS, macOS, and Google web apps. When he isn’t hammering away at his Magic Keyboard, you can catch him binge-watching productivity hacks on YouTube.Read Dilum’s Full Bio

Leave a Reply

Your email address will not be published.Required fields are marked*

Comment*

Name*

Email*

Website

Welcome to Help Desk Geek- a blog full of tech tips from trusted tech experts. We have thousands of articles and guides to help you troubleshoot any issue. Our articles have been read over 150 million times since we launched in 2008.

HomeAbout UsEditorial StandardsContact UsTerms of Use

Copyright © 2008-2024 Help Desk Geek.com, LLC All Rights Reserved