How to Fix “Hard Drive Not Installed” Error on Windows 11

A frustrating problem with an easy fix

If your Windows PC won’t boot and displays a “Hard drive not installed” error message, you have either a hardware failure or an incorrect boot priority order. This error occurs on both Windows 10 and 11 and seems to commonly affect Dell laptops.

In this article, we’ll explain how to troubleshoot and fix the “Hard drive not installed” error so that you can get your PC up and running once again.

Step 1: Try a Hard Reset

A hard reset completely reboots your computer and can help resolve frustrating glitches. To hard reset your PC:

Step 2: Check the Hard Drive Cables

One of the most common reasons for the hard drive not detected issue is a loose or damaged connection between your hard drive and motherboard. Luckily, this is also the easiest to fix, whether your problem lies with an internal HDD, SSD, or external hard drive.

To check whether this is the case, open up your computer’s case and locate the hard drive(s). They usually look like small, flat, black boxes. There should be a SATA cable and power cable connecting each hard drive to the motherboard and power supply.

Make sure these cable connections are all firmly in place and don’t show any signs of deterioration. If they look damaged, try replacing them with new cables, then re-enter the BIOS setup utility and check whether the system recognizes the drive.

If you have a laptop, this process is a bit more complicated. You can open up the back of the laptop case to have a look at your storage devices, but you might cause irreparable damage in the process. We recommend that if the case is too difficult to open on your own, you take it to a reputable repair shop to avoid further damage.

Step 3: Check the BIOS/UEFI

The “Hard drive not installed” bug is a BIOS error message that appears when you try to boot a Windows PC, and it can’t find the boot drive. In order to fix this error, you need toenter the BIOS settings. Here’s how:

Once you have access to the BIOS settings, you need to check a few key settings:

Incorrect date and time settings can prevent your computer from booting. Here’s how to change the date and time within the BIOS settings:

This step is particularly important if you use a Dell PC, though it may help with other manufacturers as well. Dell computers provide two boot modes: UEFI (the default mode) and Legacy. If you install your operating system in one mode, but the boot mode is set to the other, you’ll run into this hard drive error.

Here’s how tochange the BIOS mode:

Note:Some users also recommend changing the HDD operating mode to AHCI. This is based on the fact that setting the HDD operating mode to RAID seems to cause both the hard drive not installed error and theInaccessible Boot Device error.

Most computers offer a hardware diagnostics feature that’s accessible from the BIOS menu. To access this setting, reboot your computer, then press theBIOSkeyrepeatedly until the menu opens. When it does, selectDiagnostics.

Follow the on-screen instructions to run your computer through several hardware diagnostics tests. If any errors appear during this process, note them down. Once it completes, look up each error code to find out what it means — hopefully, one will relate to your disk drive and you’ll have an answer to your problems.

Step 4: Test the Hard Drive in a Different Computer

If there’s no visible physical damage to your hard drive or cables, it’s possible that the hard disk has lost functionality for various reasons. To check whether or not this is the case, you could remove your boot device and connect it to a different PC.

If it doesn’t work on the new PC either, you’ll likely need a new hard drive. If the PC can access the hard drive normally, then the problem lies elsewhere. In this case, you should test the hard drive for bad sectors and repair them before reconnecting it to the other computer.

To do so:

If this doesn’t work, you can also try formatting your hard drive. We recommend backing up your data before doing so, as this process will delete everything that’s on the hard drive — including the Windows operating system.

Hard Drive; Easy Fix

Getting locked out of your PC due to a mystery error is frustrating, and it can even affect your livelihood if you need to work from home. Hopefully, with the help of this article, you can troubleshoot and resolve your hard drive issues.

Jake Harfield is an Australian freelance writer whose passion is finding out how different technologies work. He has written for several online publications, focusing on explaining what he has learned to help others with their tech problems. He’s an avid hiker and birder, and in his spare time you’ll find him in the Aussie bush listening to the birdsong.Read Jake’s Full Bio

Your email address will not be published.Required fields are marked*

Comment*

Name*

Email*

Website

Welcome to Help Desk Geek- a blog full of tech tips from trusted tech experts. We have thousands of articles and guides to help you troubleshoot any issue. Our articles have been read over 150 million times since we launched in 2008.

HomeAbout UsEditorial StandardsContact UsTerms of Use

How to Fix “Hard Drive Not Installed” Error on Windows 11#

Step 1: Try a Hard Reset#

Step 2: Check the Hard Drive Cables#

Step 3: Check the BIOS/UEFI#

Step 4: Test the Hard Drive in a Different Computer#

Hard Drive; Easy Fix#

Leave a Reply#