How To Fix Amazon Fire Tablet Not Charging

We dig deep and find the answers

The Amazon Fire is a sturdy and inexpensive tablet for those on a budget. Unfortunately, many of the models suffer from a consistent design flaw. The chargers for these tablets have a tendency of going bad, leaving your otherwise functional tablet, starved of power.

To say that this is frustrating would be an understatement. But don’t throw your tablet across the room just yet. There are plenty of troubleshooting methods to get your Fire fully charged and ready to go. We’ll show you to avoid having a “rotted” charger port, provide a few approaches to test and see where the malfunction lies, and provide a few guides on how to fix it.

The problem can lie in one of four areas: faulty software, the battery, the charging adapter (including the cable), and the charging port itself. We’ll dig deep into each in order to provide a swift resolution to when your Amazon Fire tablet is not charging.

How To Fix Amazon Fire Tablet Not Charging

When your Amazon Fire decides it no longer wants to charge, there are a few tests we can run in order to locate the cause.

This should be a no-brainer but prior to testing the device itself, ensure that the outlet it’s plugged into has an active charge. You get zero input without some output.

To determine if the charger isn’t working, you can take the USB cable and attach it to a computer or other power source to look for a charge. If it starts to charge, the problem is with the charger itself. You canbuy a relatively inexpensive onedirectly from the Amazon official website.

In order to test the cable itself, you’ll need to have another one on hand. All micro-USB cables are essentially the same and will work interchangeably. Simply swap out the currently used cable for a new one and see if that solves the issue. If this turns out to be the problem, you can easily replace it, either from an electronics store or Amazon.com.

Constant reconnection can cause the circuitry inside the charging port to become loose over time, and in some cases, detach completely. This can also occur due to prolonged connection while using the Fire, as the port was not designed to withstand the stress of having the cable yanked out on a consistent basis.

When you go to connect the cable, ensure that it is seated securely. Attempt to move it around gently to detect any signs of the connector being loose. If this is the case, you can attempt to lay your Fire on a flat surface and charge it that way. Should this fix provide a charge, then you know that the port is leading to your Amazon Fire tablet not charging.

Found no fault in the hardware? The problem could be with the software. We can attempt a forced reset to see if that does the trick. This will shut down all currently open apps and tabs in order to start fresh.

Still no charge? A factory reset could help you. Just know that this should only be performed so long as the other methods have failed to produce positive results. This will wipe everything you have loaded onto your tablet and return it to its default configuration without a guarantee of resolving the issue.

Next, we’ll force a system reload.

Dead Battery

Have all of the above steps failed you? Then the problem most certainly falls on your battery. This is a major problem as replacing the battery will cost you practically the same as a brand new Amazon Fire. Amazon also highly discourages battery replacements but if you’re okay with it, you can do it yourself.

Your Amazon Fire is fine but the battery has died and requires a replacement. That leaves two options – send it back to Amazon and trade it in for a new one, or just do it yourself via a third-party seller.

From this point on you should understand that by opening up your Amazon Fire, any warranty you had will become null and void. If you’re okay with this, you can find a bunch of Amazon sellers that will provide you with a replacement battery for the Kindle Fire.

Before you purchase, you’ll want to have the part number for the battery you’re using, which can be found online in your Kindle Fire specs or printed on the battery itself after you’ve opened it up.

To open up your Kindle Fire will require a prying tool, or a spudger. You can use a screwdriver if you’re okay with a large number of scratches and chips in the body of the device. But it’s not recommended.

To open the device:

To remove the battery:

Tips To Avoid a Rotting Charger Port

Light tablet users shouldn’t need these tips. These are the users who turn the machine on once a week to watch a movie and then put it away again. Unfortunately, for heavy users, port rot can be a very real issue.

Every time the charging cable is inserted and removed, the risk of port rot is increased. Over time, the mechanical stress placed on the glue or solder holding the port on the circuit board inside the machine will cause the connection to fail and the port to become loose.

To prevent this sort of thing:

Following these few things should help you prolong or outright prevent potential port rot on your tablet or any other mobile device.

Former US Army IT communications specialist who began his online blogging career in 2016. Joseph has over 10 years experience in the IT industry as both an analyst and communications expert. He’s a night owl and an avid Red Bull consumer who spends most of his downtime enthralled by online gaming and website building.Read Joseph’s Full Bio

Welcome to Help Desk Geek- a blog full of tech tips from trusted tech experts. We have thousands of articles and guides to help you troubleshoot any issue. Our articles have been read over 150 million times since we launched in 2008.

HomeAbout UsEditorial StandardsContact UsTerms of Use

Copyright © 2008-2024 Help Desk Geek.com, LLC All Rights Reserved