How to Change the Boot Order in the BIOS on Your Windows PC

Plus the one time boot method you should use

Your PC boots from its internal hard disk or solid-state drive by default, but that’s not always ideal. Multiple instances—such astroubleshooting your Windows installation,setting up a different operating system, and checking the RAM for errors—may require you to boot from external media such as a DVD or USB stick.

In this tutorial, you’ll show you how to change the boot order in the BIOS or UEFI on your Microsoft Windows 10/11 PC. But before you do that, you may want to consider using the One-Time Boot Menu instead.

How to Use the One-Time Boot Menu

The best way to change the boot order in Windows is to use your PC’s One-Time Boot Menu for one-off instances. That involves pressing a specific key—such asEscorF12—immediately during the startup boot sequence.

Tip: You may see the Boot Menu key listed within the splash screen at computer startup. If not, check your motherboard’s user manual or online documentation for the correct key.

After loading the One-Time Boot Menu, use theUpandDowndirectional arrow keys to select the device you want to boot from and pressEnter.

However, if you want to boot from the same device multiple times or configure your PC to give preference to external media, it’s best to make a permanent change to the boot order via the BIOS or UEFI.

How to Access BIOS and Change Boot Order

BIOS stands for Basic Input/Output System. It’s low-level software that verifies your computer’s hardware by performing a P.O.S.T. (Power On Self Test) at startup. If everything then appears okay, it loads Windows from internal storage. However, you can instruct your computer’s BIOS to look elsewhere for bootable media, such as an optical disc or removable USB drive.

To change the boot order, you must instruct your PC to load the BIOS user interface by pressing the BIOS Setup key at computer startup. It varies for each motherboard manufacturer, so here’s what you can do to enter BIOS:

Tip: Press the BIOS Setup key quickly multiple times during the boot sequence. If you see the Windows logo, you must reboot your PC and try again.

If you’re running a newer Windows 11/10 PC, then skip down to the UEFI section, which has a different method to access the BIOS.

After loading the BIOS setup utility, you can change the boot order after locating the list of bootable devices or the boot order. The exact method varies between motherboard manufacturers, but you should get the general idea with the following steps.

  1. Navigate to the tab or section—e.g.,BootorAdvanced BIOS Features—that displays the list of boot devices or your computer’s boot order.

  2. Highlight each device (Removable Devices,CD-ROM,Hard Drive, etc.) and arrange them in the order you want. If the BIOS displays options such as theFirst Boot Device,Second Boot Device,Third Boot Device, and so on, select each item and pick a device on the pop-up menu.

  3. Save your changes and exit the BIOS.

BIOS requires the keyboard for navigation. You’ll find a list of keys with their corresponding actions listed at the bottom and right sides of the screen, such as:

How to Access UEFI and Change Boot Order

If you use a new PC, the chances are that it uses UEFI (orUnified Extensible Firmware Interface). It’s faster and more efficient than the BIOS, with support for larger storage drives. The procedure to change the boot order is essentially the same as the BIOS, if not easier.

Note: Despite using UEFI, your motherboard manufacturer may refer to it as the “UEFI BIOS” or just “BIOS”.

Depending on your PC’s motherboard, you might be able to load the UEFI Setup by pressing the relevant key at startup or by experimenting with theF2,F9,F10,F11, andDELkeys. You could also check your motherboard’s user manual or online documentation for the exact key.

However, it’s possible to enter the UEFI on any PC via the Advanced Startup Options screen inWinRE (Windows Recovery Environment).

  1. Boot into Windows 10/11.

  2. Launch theStartmenu and openSettings. Then, go toSystem/Update & Security>Recovery>Advanced Options.

  3. SelectRestart now.

  4. Wait until your PC reboots and loads WinRE.

  5. SelectTroubleshoot>Advanced options>UEFI Firmware Settings>Restartto load the UEFI.

Tip: If you have trouble booting into the Windows desktop, hard reset your PC at the Windows logo three times to enter the Windows Recovery Environment.

Most UEFI interfaces support mouse and trackpad navigation. If yours don’t, use the keyboard hotkeys at the bottom and right sides of the screen to interact with the menu options.

UEFI interfaces are also slightly different from each other. For example, the UEFI in ASUS laptops displays anEZ Modethat only shows a list of standard options. Look for aBoot PriorityorBoot Sequencesection to change the boot order. Or, you can switch toAdvanced Mode(you’ll see the option listed somewhere on the screen) and go through the following steps.

  1. Navigate to theBoottab within the UEFI.

  2. Look for a list of bootable devices or a boot order (e.g.,Boot Options #1).

  3. Change the boot order as needed—e.g., set a USB device as the first boot device and Windows Boot Manager as the second.

  4. Switch to theSavetab and save your changes.

Note: UEFI uses a feature called Secure Boot that prevents you from loading operating systems—such as Linux—from external storage devices. To disable the functionality, look for aSecure Bootoption within the UEFI (usually located under theSecuritytab) and set it toDisabled.

How Your PC’s New Boot Order Works

Depending on how you change the boot order, your PC will check the first boot device for bootable media. If it fails to detect any, it will look at the next device within the list and so on until it finds a setup or operating system that it can boot into. If you want to change the boot order at a later time, re-enter the BIOS or UEFI and set your hard disk drive or SSD as the first boot device.

Dilum Senevirathne is a freelance tech writer and blogger with three years of experience writing for online technology publications. He specializes in topics related to iOS, iPadOS, macOS, and Google web apps. When he isn’t hammering away at his Magic Keyboard, you can catch him binge-watching productivity hacks on YouTube.Read Dilum’s Full Bio

Leave a Reply

Your email address will not be published.Required fields are marked*

Comment*

Name*

Email*

Website

Welcome to Help Desk Geek- a blog full of tech tips from trusted tech experts. We have thousands of articles and guides to help you troubleshoot any issue. Our articles have been read over 150 million times since we launched in 2008.

HomeAbout UsEditorial StandardsContact UsTerms of Use

Copyright © 2008-2024 Help Desk Geek.com, LLC All Rights Reserved